list price 229.99 

Exclusive Features

• Veterinarian Recommended and Approved!
• Ideal for any size yard, even up to 25 acres
• Includes the Stubborn Dog Receiver featuring:
  • The most powerful receiver on the market
  • Five Levels of Programmable Correction plus a vibration feature in the warning tone as an additional deterrent
  • Level one is warning only with vibration - ideal for initial training or very timid pets
  • Levels two thru four are for easy or average to train pets
  • Level five is for very hard to train or stubborn pets
  • Progressive Correction - if your pet attempts to leave the yard, the receiver will automatically increase the correction level until he returns
  • Anti Linger so the dog cannot stay in the warning zone and run down the battery
  • Low Battery Indicator Light - Lets you know when the batteries need replacing. The #1 cause of pets leaving a containment system are weak or dead batteries
  • Levels are easily changed with a push of a button on the receiver
  • Uses a common 9 volt battery providing a average battery life of 6-9 months.
  • Waterproof receiver
  • Ideal for extremely hard to train dogs or dogs that are consistently breaking through the boundary and need a stronger receiver
• Audio break alarm and light on the transmitter warns you if the wire has been broken
• Safety features include:
  • Digitally coded signal to prevent false activation. Only our transmitter can activate the receiver. Other brands' receivers can be activated by Televisions, cordless phones, garage door openers, etc. We use filters and coded signals to prevent this. Don't trust your pet's safety to anything but a PetSafe™ Containment System
  • Receiver Fail-Safe. If your pet gets trapped in the correction zone, the receiver will shut down after 20 seconds to prevent over correction
• Built-in lightning and surge protection for storm-prone areas. If you live in an area that is highly prone to lightning or surges, you may want to consider our  Lightning Protection Module.  Regardless, your system is covered under warranty against lightning or surge damage
• Transmitter cover conceals range adjustment control to prevent tampering and accidental increases or decreases in signal
• The only UL and CE rated system on the market
• Easy-to-follow manual covering installation and pet training

You can order just the right system for your size yard. The dog fences listed below are the most popular and include enough wire and flags to cover yards from 1/3 to 5 acres in size.  If your yard is larger than 5 acres, all you need is more wire and flags. This system is capable of enclosing up to 25 acres. Boundary flags are used to establish a visual boundary for your pet during training. After about 30 days, you will be able to remove the flags.

If you live in an area that is highly prone to lightning or surges, you may want to consider our Lightning Protection Module. You can order the Lightning Protection Module on this page.  Regardless, your system is covered under warranty against lightning or surge damage.

INSTALLATION LAYOUTS

Measure how much wire you need for your layout, remember to at least double the length for twisted areas.

Above Ground Installation
These instructions will not be included with your pet fence. You should print this page if you are going to use the Above Ground Installation method.
  SOD STAPLES A BOX OF 100 MSRP $15.00  HAPPY TAILS PRICE $14.00

A common misconception about "Underground Fencing" is that is needs to be buried "Underground". This unfortunate but understandable misconception often scares many people away from enjoying the freedom that these fences provide both you and your pet.

There is no need to spend a weekend burying the wire underground, or paying some one hundreds of dollars to bury the boundary wire when it can be installed above ground in only a matter of a fes hours.

Using wire pegs you can "Staple" the wire to the ground. Within a matter of 7 - 14 days the root system of your lawn will grow over the wire and hide it completely from view, essentially "Burying" it into the lawn. Not only does this make the installation of your new pet containment systems hassle free, it also eliminates any potential loss of signal that may result from burying the boundary wire under several inches of dirt, not to mention the backaches and blisters it will save you.

The procedure is simple:

Step 1:

• First run your twisted wire from your transmitter out to the beginning of your boundary.
• Now "Staple" the twisted wire to the ground by hammering in a wire "Staple" every 5 - 10 feet.
• Now stop and look at the wire. Is it completely flush to the ground all the way to the start of the boundary? If not go and "Staple" any raised areas before proceeding to the next step. The wire MUST completely touch the ground.

Step 2:

Next, place a "Staple" where the twisted wire and the beginning of the boundary meet (if you have a splice in this area please dig a small hole about 2 inches deep and bury the splice.

• Then place a "Staple" in the front of and behind the splice to relieve any pressure on the splice)
• Now walk the wire to the first corner of your boundary and "Staple" it to the ground. Repeat this step for all four corners of your boundary.
• Next go back just as you did with your twisted wire and "Staple" any raised areas down until they are completely flush with the ground.

You are now done!!! It is that simple.

  DIRECT BURIAL SPLICE - THESE SPLICES WILL PROTECT YOUR CONNECTIONS FROM THE ELEMENTS. $1.00 EACH.